Sensors Online
0
of 0 total
Active Alerts
0
temperature out of range
Maintenance Due
0
calibration or battery
Last Update
--:--
auto-refreshes every 30s
Sensor Overview
Waiting for sensor data…
🔋 Battery
--°C
Temperature History
Temperature
Max limit
Min limit
🌡 Calibration Status
—
—
Verify the sensor reading matches a calibrated thermometer. This creates a compliance audit trail.
📐 If the reading differs consistently from the reference, the sensor may be faulty → contact SafeTemp in this event.
Confirm the accuracy of any thermometer you already have on site — for example, by placing it in ice water (0°C) or checking it against another known reference point — before using it to check this sensor. Once you're confident it's accurate, place it in the same location as this sensor and leave both until the reading settles, which may take longer than a few minutes depending on the device. The two readings should agree to within a small, sensible margin. This satisfies FSA/EHO expectations for periodic verification of temperature monitoring equipment against a known reference point, with a dated record kept here as your evidence.
No calibration records yet
🔋 Battery Status
—
—
No battery replacement records yet
Recent Readings
| Date & Time | Temperature | Status |
|---|
Reporting
📅 Date & Time Range
📡 Select Sensors
📊
Select sensors and a date range above, then click Generate Report
Settings
✓ All changes saved automatically
📍
Site Settings — this site
These settings apply only to the site you're currently viewing, not your other sites.
🏪 Company & Branding
Company Name
Shown on printed reports
Company Logo
PNG or JPG — shown on printed reports
📁 Click to upload logo
📍 Zone Management
Zones group sensors within this site — e.g. Kitchen, Bar, Walk-in Freezer.
🔧 Maintenance Intervals
Calibration Interval
How often probes must be calibrated
months
No Signal Multiplier
Alert after this many missed readings. E.g. 2 = alert after 2× reporting rate with no signal.
Reporting Rate
How often sensors send their readings to the hub
💡 30 minutes or 1 hour cover normal day-to-day use for most sites. Approx. battery life on 2× Energizer Ultimate Lithium AAA: ~1.5 years at 30 minutes, ~2 years at 1 hour.
🌡 Default Temperature Ranges
Edit the default safe ranges when adding a new sensor. Does not affect already-configured sensors.
📶 Step 1 — Restaurant WiFi (Internet Connection)
Connect the Hub to the restaurant's WiFi router. Sensors still connect to FridgeSensor as normal. Internet access enables cloud backup and remote access. Do this step first — cloud sync below needs an internet connection to work.
Enable Router Connection
Connect to restaurant WiFi for internet access
WiFi Network Name (SSID)
The restaurant's WiFi network name
WiFi Password
Leave blank to keep current password
Status: not configured
☁️ Step 2 — Cloud Sync
Connect to the SafeTemp cloud to store data permanently, access the dashboard remotely, and enable subscription management. Make sure Step 1 above shows Connected before enabling this.
Enable Cloud Sync
Send readings to the SafeTemp cloud every 5 minutes
Cloud URL
Your SafeTemp cloud server address
API Key
Hub API key from your cloud server .env file
Status: not configured
🔔 Alert Contacts
Alerts are sent when temperatures go out of range, sensors go offline, or maintenance is due.
Alert Email
Email address for alerts
Enable SMS Alerts
Receive text message alerts on your mobile. Fair use: 50 SMS per month included. Alerts stop if limit is reached until the following month.
Alert Mobile Number
Mobile number for SMS alerts (include country code e.g. +447700000000)
🏢
Company Settings
These apply across your whole company — every site, not just the one you're currently viewing.
🔒 Security & Access Levels
My Account
New Username / Email
Leave blank to keep current
New Password
Leave blank to keep current
Current Password
Required to confirm any changes